CIEEC.COM
简体中文  繁体中文 Login| Join now| Member Center| Help
HomeProduct DirectorySell-BuyCompany Directory
China International Electrical & Electronics Commerce Network
  » Company Profile
    » Products Info
  » Sell-Buy
  » Certificates
  » Contact Us
  » Jobs
Ad Link

Guizhou Zhenhua Asia-Pacific High-Tech Electronic Materials Co.,Ltd.

Product Detail

Silver Pastes for Disk Capacitor

[No Pic]
Description:
Product Class : Electronic Material·Metal Material
Designation:SP-205-60 SP-205-65 SP-205-70
Special purpose:The electrode formation of TC.HIK and high voltage disk capacitor
一、Composition Properties:   
1.silver content:SP-205-60: 60±2%; SP-205-65: 65±2%; SP-205-70: 70±2%;
2.viscosity:1500-2000Kcps(4# spindle; 25℃; 0.3r/min; NDJ-8S; shanghai)
3.fineness:≤10μm
4.line resolution: 150-200μm
5.paste coverage:SP-205-60; 140-160cm²/g; SP-205-65; 120-140cm²/g; SP-205-70; 100-120cm²/g;
二、The fired film Properties
1.Sheet Resistivity:≤5mΩ/□
2.Condense Film; metallic colour (microscopy)
3.Solderability: coverage>95%(microscopy;Sn62/Pb36/Ag2; 230℃; rosin flux)
4.Solder Resistance:≥5S(Sn62/Pb36/Ag2; 230℃; rosin flux)
5.Adhesion:90° peel≥2Kgf (2mmX2mm pad; ф0.5mm wire; Sn62/Pb36/Ag2; 230℃; rosin flux)
三、Application Guidelines
1.Screen Print: 180-250mesh; optimum: 200mesh
2.Drying:150℃/3min
3.Firing: peak temperature and time: 800±20℃/10min; cycle:60min
4.Soldering:Sn63/Pb37, Sn60/Pb40 or Sn62/Pb36/Ag2 temperature:215℃-225℃;dipping:1-2sec:flux: rosin flux
5.Storage :Keep in a cool place away from heater or open flames, minimum shelf-life six months.
Al Pastes for PTCR
Designation: AP-202-55 AP-202-60
Special Purpose: The ohmic contact electrode formation of PTCR.
一、Compostition Properties
1.Silver Content:AP-202-55; 55±2%; AP-202-60; 60±2%
2.Viscosity:1500-2000Kcps(4# spindle; 25℃; 0.3r/min; NDJ-8S; Shanghai)
3.Fineness:≤10μm
4.Coverage:150-170cm²/g
二、The Fired Film Properties
1.Sheet Resistivity:≤45mΩ/□
2.Surface Resistance ≤0.1Ω,gap≥2mm
3.Ohmic Characteristic:equal to In50Ga50 electrode.(RA1-RInGa)/RInGa≤2%
4.Heat Age: 250℃/72hr,PTCR for heating △
R/R0≤50%; PTCR for limiting current and for erasing △R/R0≤3%
5.Anti-humid:40℃, 95%RH/72hr, no oxide
6.Electrical Current Age:△R/R0≤50%, V=220v±10%/72hr
三、Application Guidelines
1.Screen print :180-250mesh. optimum: 200mesh
2.Drying:150℃-200℃/3min
3.Firing: peak temp.and time: 650±10℃/5-8min, cycle: 30-45min
4.Thinner:ethylene glycol monobutyl ether or terpineol
5.Storage: keep in a cool place away from heater or open flames, minimum shelf-life six months.
Contact Now


Online Help | Technology Document | Industry News | CIEEC News | Contact Us
Copyright © 2006-2007 CIEEC.COM All Rights Reserved.