Specification: |
| MODEL | JTX |
INPUT | Voltage | Universal input 36 ~ 72 VDC. |
Frequency | |
Current | |
Inrush Current | |
Leakage Current | |
OUTPUT | Voltage | 5V/15A,3.3V/10A, -5V/1A, -48V/0.4A |
|
Voltage Regulation | 5V ±0.5% From no load to full load |
3.3V ±0.5% From no load to full load |
-5V ±0.5% From no load to full load |
Load(MAX.) | 140W |
Ripple & Noise(MAX.) | 100mV |
Efficiency(TYP.) | ≥75% |
Max Power | 190W |
(inputside) protection | Protected against high output voltage | 72v~74v |
Protected against low output voltage | 34v~36v |
Protected against reverse polarity | |
(output side) PROTECTION | Protected against short circuit | |
Protected against reverse polarity | |
+5v Protected against high output voltage | 5.5~5.7v |
+5v Protected against low output voltage | 4.5~4.7v |
3.3v Protected against high output voltage | 3.6~3.8v |
3.3v Protected against low output voltage | 2.8~3.0v |
-5v Protected against high output voltage | -4.5~ -4.7v |
-5v Protected against low output voltage | -5.5~ -5.7v |
ENVIRONMENT | Temperature | -40℃—55℃ |
Humidity | 5%—95% |
Altitude | 3000M |
M.T.B.F. | ≥ 88Khour |
SAFETY | EN60950-1 UL60950-1 TUV |
EMC | EMI Standards | CLASS A |
EMS Standards | CLASS A |
OTHERS | Cooling | Natural convection |
Major fault alarms（visual）in a system like output fuse failure |
The individual module shall be capable of running in stand-alone mode as well as in parallel mode. When operating in parallel mode it shall have a facility of load sharing (ie. difference between sharing current of the modules shall be within 10% of rated output current) between the rectifier modules in a system. |
The every single output of individual module shall be capable of runnin |
The module shall have soft start facility during starting period. |
|
|
