ltems | Methods | Requirement |
Withstand Voltage | Methods：V-block Time：1min | No breakdown or flashover |
Solderability | Temperature：235±5℃ Time：5s | 90% coverage Min |
Over-load | 2.5times of rated voltage Time：5s | ±（1%R+0.05Ω） |
fuse characteristic | <2Ω：16times of rated power | RF10：≤60s | RF11：≤90s |
2~10Ω：12times of rated power | ≤60s | ≤120s |
>10Ω：12times of rated power | ≤30s | ≤60s |
terminal strength | Tension：10N Bending force ：2time Torque：180° 2time | ±（5%R+0.05Ω） |
Resistance to soldering heat | Trough temperature：350±10℃ Time：3.5±0.5S | ±（1%R+0.05Ω） |
Fast temperature change | -25℃~125℃3 time cycle | ±（1%R+0.05Ω） |
Vibration | 10Hz~500Hz 98m/s2 6h | ±（1%R+0.05Ω） |
Climate category | Exothermic -cycle damp-heat(first cycle) -cold-depression - cycle damp-heat(rest cycle) -DC load | ±（5%R+0.1Ω） |
Resistance vs temperature | -25℃~125℃ | ≤±350×10-6/℃ |
Endurance at 70℃ | Temperature：70℃ Rated voltage Time：1000h | ±（5%R+0.1Ω） |
Continuous over-load | 2.5Rated voltage ON1sec OFF 25sec 10000 time | ±（2%R+0.05Ω） |
Steady damp-heat | Temperature：40℃ humidity95% Time：56days | ±（5%R+0.1Ω） |
Occasional over-load | Stand5，10，16times of rated power (RF10) | No fire |
