CIEEC.COM
English  簡體中文   登錄| 注冊| 會員中心| 幫助
首頁産品目錄供求信息公司目錄
中國國際電氣與電子商貿網
  » 公司簡介
    » 産品展示
  » 供求信息
  » 證書榮譽
  » 聯係方式
  » 招聘信息
相關廣告鏈接

中航光電科技股份有限公司

産品詳請

SC/DSC係列光纖連接器和轉接器

[暫無圖片]
産品描述:
産品類別 : 連接器·光纖連接器

SC/DSC光纖連接器和轉接器係列(SC/DSC Connector & Adapter Series)

特點:
推拉式連接方式,安裝取卸快速
標準塑料零件,互換性好
軸向鎖緊開關,連接可靠
陶瓷插針,PC、UPC和APC研磨
可提供UL幹線級防火光纜或低煙無鹵光纜
光纜外徑:φ0.9、φ2、φ3
單工/雙工插頭和轉接器
陶瓷套筒,插入損耗低
符合標準:YD/T895、IEC61754-4
Feature:
Push-pull design,quick connection and remove
Standard plastic part,good interchangeability
Axial locking design for reliable connection
Ceramic ferrule,PC、UPC & APC polishing
Available to OFNR cable or LSZH cable
Cable OD.:φ0.9、φ2、φ3
Simplex /Double connector and adapter
Ceramic sleeve,low insertion loss
According standard:YD/T895、IEC61754-4
SC插頭(SC connector)           DSC插頭 (DSC connector)
                               
SC/DSC轉接器(SC/DSC adapter)
用途:
各類光纖通信係統
光纖CATV
光纖局域網
Applications:
Optical fiber communication networks
Optical CATV
Optical LAN
 
 
性能指標(Specifications):
類型(Type)
 
參數(Parameter)
插頭(Connector)
轉接器
(Adapter)
單模(SM)
多模(MM)
PC
UPC
APC
PC
回波損耗  Return Loss        (dB)
≥45
≥50
≥60
≥35
/
插入損耗  Insertion Loss       (dB)
≤0.2(典型值),≤0.3(最大值)
≤0.1(典型值)
重複性    Repeatability       (dB)
≤0.1
/
插拔次數  Durability   (次/Matings)
≥500
≥500
工作溫度  Operating Temperature(℃)
-25 ~ +70
-25 ~ +70
抗拉強度  Tensile Strength      (N)
≥100(φ3),≥70(φ2),φ0.9産品不作此項要求
/
 
訂貨信息(Ordering Information):
參見附錄Ⅰ(See  appendix  Ⅰ)
注  意:1) 在使用前請將插針體和插針端面用酒精和脫脂棉清洗幹淨。
2) 使用時光纖/光纜的盤卷直徑不小於光纖/光纜直徑的25倍。
3) 使用中請避免磕碰,使用後請及時戴上防塵帽。
NOTE:1)You must clean the ceramic ferrule and it’s tip with alcohol and absorbent cotton very carefully before using.
2)The minimum bending diameter should not be less than 25 times of the fiber/cable diameter.
3)Please avoid cashing or bumping them in use, Put on the dust cap immediately after using.
立刻聯係


在線幫助 | 技術文檔 | 行業新聞 | 站內新聞 | 聯係我們
Copyright © 2006-2007 CIEEC.COM All rights reserved.