CIEEC.COM
English  簡體中文   登錄| 注冊| 會員中心| 幫助
首頁産品目錄供求信息公司目錄
中國國際電氣與電子商貿網
  » 公司簡介
    » 産品展示
  » 供求信息
  » 證書榮譽
  » 聯係方式
  » 招聘信息
相關廣告鏈接

中航光電科技股份有限公司

産品詳請

SMA和FDDI係列光纖連接器

[暫無圖片]
産品描述:
産品類別 : 連接器·光纖連接器

SMA和FDDI光纖連接器係列(SMA  &  FDDI  Connector Series)

 
特點:
FDDI可同時接通2芯光纖
SMA采用陶瓷(金屬、非金屬)插針,PC研磨
可提供UL幹線級防火光纜或低煙無鹵光纜
SMA可采用塑料光纖
光纜外徑:φ0.9、φ2、φ3(SMA)、φ2並行纜、φ3並行纜(FDDI)
SMA符合標準:GB12507.2
Feature:
Simultaneous connecting 2 fiber
Standard plastic body,good interchangeability
Push-pull mechanism for quick connection and remove
Available to OFNR cable or LSZH cable
Available to plastic optical fiber
Cable OD:φ0.9、φ2 、φ3(SMA)、φ2 parallel cable、φ3 parallel cable(FDDI)
According standard:GB12507.2
FDDI連接器(FDDI connector)
 
 
 
SMA連接器(SMA connector)
 
用途:
數據和通信係統
光纖局域網
醫學、工業和軍事應用
Applications:
Data and communication system
Optical LAN
Medicine,Industry and Military
 
 
 
性能指標(Specifications):
 
類型(Type)
參數(Parameter)
多模FDDI插頭
(FDDI connector)
多模SMA插頭
(SMA connector)
 
回波損耗  Return Loss        (dB)
≥35
≥35
 
插入損耗  Insertion Loss       (dB)
≤0.2(典型值),≤0.5(最大值)
≤0.3(典型值),≤0.5(最大值)
 
重複性    Repeatability       (dB)
≤0.2
 
插拔次數  Durability   (次/Matings)
≥500(金屬),≥1,000(陶瓷)
 
工作溫度  Operating Temperature(℃)
-40 ~ +85(金屬)、-25 ~ +70(非金屬)
 
抗拉強度  Tensile Strength      (N)
≥90(φ3)、≥70(φ2)、φ0.9産品不作此要求
 
 
 
訂貨信息(Ordering Information):
參見附錄Ⅰ(See  appendix  Ⅰ)
注  意:1) 在使用前請將插針體和插針端面用酒精和脫脂棉清洗幹淨。
2) 使用時光纖/光纜的盤卷直徑不小於光纖/光纜直徑的25倍。
3) 使用中請避免磕碰,使用後請及時戴上防塵帽。
NOTE:1)You must clean the ceramic ferrule and it’s tip with alcohol and absorbent cotton very carefully before using.
2)The minimum bending diameter should not be less than 25 times of the fiber/cable diameter.
3)Please avoid cashing or bumping them in use, Put on the dust cap immediately after using.
立刻聯係


在線幫助 | 技術文檔 | 行業新聞 | 站內新聞 | 聯係我們
Copyright © 2006-2007 CIEEC.COM All rights reserved.