CIEEC.COM
English  繁体中文 登录| 注册| 会员中心| 帮助
首页产品目录供求信息公司目录
中国国际电气与电子商贸网
  » 公司简介
    » 产品展示
  » 供求信息
  » 证书荣誉
  » 联系方式
  » 招聘信息
相关广告链接

中航光电科技股份有限公司

产品详请

MT-RJ系列光纤连接器和转接器

[暂无图片]
产品描述:
产品类别 : 连接器·光纤连接器

MT-RJ光纤连接器和转接器系列(MT-RJ  Connector & Adapter Series)

 
特点:
标准塑料壳体,互换性好
推拉式连接方式,安装取卸快速
RJ-45锁紧开关,连接可靠
可同时接通2或4芯光纤,适合高密度安装
可提供UL干线级防火光缆或低烟无卤光缆
光缆外径:φ3集束缆、φ3带状缆、φ2并行缆、φ0.9光纤
符合标准:YD/T1271.2、IEC61754-18、TIA/EIA-604-12
Feature:
Standard plastic body,good interchangeability
Push-pull mechanism for quick connection and remove
RJ-45 locking key design for reliable connection
Simultaneous connecting 2 or 4 fiber,high density installation
Available to OFNR cable or LSZH cable
Cable OD.:φ3 bundle cable、φ3 ribbon cable、φ2 parallel cable
According standard:YD/T1271.2、IEC61754-18、TIA/EIA-604-12
MTRJ插头(MTRJ connecter)
 
用途:
数据和通信系统
光纤接入网
光纤到户,光纤到桌面
集成光电系统
Applications:
Data and communication system
Optical access network(OAN)
Fiber To The Home(FTTH),Fiber To The Desk(FTTH)
Intergrated photoelectricity system
MTRJ转接器(MTRJ adapter)
 
 
 
性能指标(Specifications):
 
类型(Type)
参数(Parameter)
插头(Connector)
转接器
(Adapter)
 
单模(SM)
多模(MM)
 
插入损耗  Insertion Loss  (dB)
≤0.3(典型值),≤0.55(最大值)
≤0.2(典型值),≤0.55(最大值)
≤0.3(典型值)
 
回波损耗  Return Loss    (dB)
≥35
≥25
/
 
重复性    Repeatability   (dB)
≤0.1   
/
 
插拔次数  Durability(次/Matings)
≥500
≥500
 
工作温度Operating Temperature(℃)
-25 ~ +70
-25 ~ +70
 
抗拉强度  Tensile Strength (N)
≥50(φ0.9产品不作此项要求)
/
 
 
 
订货信息(Ordering Information):
参见附录Ⅰ(See  appendix  Ⅰ)
注  意:1) 在使用前请将插针体和插针端面用酒精和脱脂棉清洗干净。
2) 使用时光纤/光缆的盘卷直径不小于光纤/光缆直径的25倍。
3) 使用中请避免磕碰,使用后请及时戴上防尘帽。
NOTE:1)You must clean the ceramic ferrule and it’s tip with alcohol and absorbent cotton very carefully before using.
2)The minimum bending diameter should not be less than 25 times of the fiber/cable diameter.
3)Please avoid cashing or bumping them in use, Put on the dust cap immediately after using.
立刻联系


在线帮助 | 技术文档 | 行业新闻 | 站内新闻 | 联系我们
Copyright © 2006-2007 CIEEC.COM All rights reserved.